E + H DP Transmitter Type : FMD78-ABA7FB1UFAF1AA (کد: E + H DELTABAR S)

FMD78 produced by Endress Hauser company of  DELTABAR S series that this series made for Differential pressure transmitter with ceramic and monosilicon sensors for flow, level and differential measurement with High accuracy with excellent long-term stability and support  HART®, PROFIBUS®PA or FOUNDATION™ Fieldbus protocols . this series support all oil and gas certificate same as ATEX CSA FM . FMD78 made With metallic measuring diaphragms and capillary diaphragm seals and the field of application is Level and Differential pressure with wide range of diaphragm seals . the Measuring ranges of FMD78 is -100 mbar to +40 bar and the maximum overload on one side is 160 bar and on both side is 240 bar . Process temperature range of PMD 78 is +400 C and the ambient temperature range is -40 C to +80 C & ambient temperature range for separate housing is -40 C to +60 C . Reference accuracy of it is Up to ±0.075 % of the set span & power supply of FMD78 for non-hazardous areas is 10.5 to 45 V DC and for EEx ia (intrinsically safe) is 10.5 to 30 V DC. Output of FMD78 is 4 to 20 mA with superimposed HART protocol, PROFIBUS PA or FOUNDATION Fieldbus that it depend to your order code .

MAIN MODEL : FMD78

DELTABAR S  DIFFERENTIAL & Level PRESSURE TRANSMITTER

Order code option :FMD78-1.2.3.4.5.6.7.8.9.10

CODE 1 : APPROVALS

A

For non-hazardous areas

1

ATEX II 1/2 G EEx ia IIC T6

6

ATEX II 1/2 G EEx ia IIC T6, overspill protection WHG

2

ATEX II 1/2 D

8

ATEX II 1 GD EEx ia IIC T6

W

CSA Class II, III Division 1, Groups E – G (Dust-Ex)

S

FM IS, Class I, II, III Division 1, Groups A – G; NI Class I Division 2, Groups A – D; AEx ia

Q

FM DIP, Class II, III Division 1, Groups E – G

U

CSA IS, Class I, II, III Division 1, Groups A – G; Class I Division 2, Groups A – D, Ex ia

E

ATEX II EEx ia + FM IS + CSA IS+FM/CSA IS Class I, II, III Division 1 Group A - G

H

NEPSI Ex ia IIC T6

CODE 2 : OUT PUT TYPE

A

4...20 mA HART, SIL operation outside, LCD

B

4...20 mA HART, SIL operation INside, LCD

C

4...20 mA HART, SIL operation inside

M

PROFIBUS PA, operation outside, LCD

N

PROFIBUS PA, operation inside, LCD

O

PROFIBUS PA, operation inside

P

FOUNDATION Fieldbus, operation outside, LCD

Q

FOUNDATION Fieldbus, operation inside, LCD

R

FOUNDATION Fieldbus, operation inside

CODE 3 :  HOUSING & Cable ENTRY

A

Aluminum T14 housing, Gland M 20x1.5

B

Aluminum T14 housing, Thread G 1/2

J

Aluminum T15 housing, Gland M 20x1.5

1

AISI 316L T14 housing, Gland M 20x1.5

K

Aluminum T15 housing, Thread G 1/2

2

AISI 316L T14 housing, Thread G 1/2

CODE 4 : RANGE & PN OF TRANSMITTER

7F

500mbar/160bar

7H

3bar/160bar

7L

16bar/160bar

7M

40bar/160bar

CODE 5 :  Calibration UNIT

B

Custom calibration

D

Factory calibration

1

Nominal range; mbar/bar

2

Nominal range; kPa/MPa

CODE 6 :  Membrane material

1

AISI 316L

2

ALLOY

3

MONEL

5

TANTAL

6

AISI 316L with Gold-Rhodium coating

CODE 7 :  Processor connection & materials

UF

Pancake DN 50 PN 16-400, AISI 316L

UH

Pancake DN 80 PN 16-400, AISI 316L

UJ

Pancake DN 100 PN 16-400, AISI 316L

GA

Thread ISO 228 G 1/2 B, PN 40, AISI 316L,

TF

Tri-Clamp, ISO 2852 DN 70 – DN 76.1 (3"),

SB

Tri-Clamp, ISO 2852 DN 25-AISI 316L

MS

DIN 11851 DN 65 PN 25,

B5

DN 80 PN 10-40 B1,

AG

2" 150 lbs RF, AISI 316/316L-FLANGE

AG

3" 150 lbs RF, AISI 316/16L

AH

4" 150 lbs RF, AISI 316/316L

CODE 8 :  CAPILARY & Fill fluid

1

m capillary, silicone oil

2

m capillary, vegetable oil

A

ft capillary, silicone oil

B

ft capillary, vegetable oil

3

m capillary, high temperature oil

4

m capillary, oil for oxygen service

CODE 9 & 10 :   Additional Option

11

Not selected